Foxwell tools on FoxwellStore

Hey guys today I’m gonna use the Foxwell BT715 Battery Analyzer to test a newly installed battery on a 1999 Corolla. Following I’ll show the steps. Connect the Foxwell BT715’s cables to the battery terminals, you should hear a beep. The tool is power on, it means successful connection. Select 12 volt system >> Regular >> In vehicle >> Top post >> Regular >> CCA And enter the rated CCA, for this battery is 640 CCA. It is processing, please wait... As you can see, BT715 will tell about the battery information including volts, measured, rated, the battery is good.  Press “Enter” to starter test. Start the engine to proceed with crank. It is testing...It says the cranking is normal. Press “Enter” to charging test, to check the alternator. Follow the instructions on screen. Press “Enter” as required. It shows charging is “No problems”. The result for this car’s battery, starter, alternator, are all normal! Done! Quite easy and fast to test a battery, with Fox

Foxwell NT530 Scan Tool can release 2017-2021 Honda Acura MDX SH-AWD electronic park brake(EPB) success. Following I’ll show how to do. I’ve been trying to find a scan tool that can release an electronic park brake for the Acura, I failed once already with a different brand. But I got this NT530 from Foxwell, fortunately, it does work! Hook up NT530 to OBD port under the dash, then take out to rear tire.  Honda >> Smart VIN >> Special functions >> Electric parking brake >> Brake pad maintenance mode This function is used in rear brake pad maintenance. Check that the following conditions are fulfilled. Stop the vehicle. Release parking brake. Battery voltage is over 10.0[V] Press “Yes”. Currently, brake pads are in the normal control position. Do you want to execute pad exchange mode? Press “Enter”. (Caution: execution time takes about 25s at the maximum.) During the transition to pad exchange mode. EPB system transition to pad exchange mode. Perform rear brake