Foxwell NT530 Release 2017-2021 Honda Acura EPB Success
Foxwell NT530 Scan Tool can release 2017-2021 Honda Acura MDX SH-AWD electronic park brake(EPB) success. Following I’ll show how to do.
I’ve been trying to find a scan tool that can release an electronic park brake for the Acura, I failed once already with a different brand. But I got this NT530 from Foxwell, fortunately, it does work!
Hook up NT530 to OBD port under the dash, then take out to rear tire.
Honda >> Smart VIN >> Special functions >> Electric parking brake >> Brake pad maintenance mode
This function is used in rear brake pad maintenance.
Check that the following conditions are fulfilled.
Stop the vehicle.
Release parking brake.
Battery voltage is over 10.0[V]
Press “Yes”.
Currently, brake pads are in the normal control position.
Do you want to execute pad exchange mode? Press “Enter”.
(Caution: execution time takes about 25s at the maximum.)
During the transition to pad exchange mode.
EPB system transition to pad exchange mode.
Perform rear brake pad maintenance.
When you are finished pad maintenance. Press “Enter”.
Did you finish the rear pad maintenance? Yes
Brake pad position return to normal brake pad position.
During the transition to normal brake pad position.
(Caution: execution time takes about 25s at the maximum.)
EPB system transition to normal pad position.
This function procedure is finished.
Turn the ignition switch off.
So you can hear the parking brake completely just released and change out your pads. Then when you’re all done, press “F3”, NT530 will re-engage your park brake.
Foxwell NT530 Scanner also supports oil reset, TPMS/SRS/ABS/DPF service, I’m glad I finally found one tool that is affordable, too.
Comments
Post a Comment